Ir directamente a la información del producto
1 de 7

TSR SSR-10AA 25A 40A 60A 80A Three Phase SSR Solid State Relay AC Control AC 480V 70-280V Input Aluminum Radiator Heat Sink

TSR SSR-10AA 25A 40A 60A 80A Three Phase SSR Solid State Relay AC Control AC 480V 70-280V Input Aluminum Radiator Heat Sink

Precio habitual $28.38 USD
Precio habitual $0.00 USD Precio de oferta $28.38 USD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.
Size

Introducing TSR SSR solid state relays - the perfect solution for your three phase AC control needs. Available in 10A, 25A, 40A, 60A, and 80A, with an AC input range of 70-280V and AC output of 480V. These relays come equipped with an aluminum radiator heat sink for superior cooling and durability. Increase your efficiency with TSR SSR solid state relays.

SPECIFICATIONS

  • Brand Name: EARUELETRIC
  • Usage: General Purpose
  • Theory: Solid State Relay
  • Model Number: TSR-40AA
  • Protect Feature: Sealed
  • Power Source: AC
  • Contact Load: Low Power
  • Control Voltage: 70-280VAC
  • Rating: 10A 480VAC
  • Control Type: AC Control AC
  • Load Current: 10A 25A 40A 60A 80A 100A 120A 200A
  • Size: 150.8mm*75.5mm*37.5mm
  • Module Number 1: SSR-10AA/SSR-25AA/SSR-40AA/SSR-60AA
  • Module Number 2: SSR-80AA/SSR-100AA/SSR-200AA
Step 1: Choose a correct control Mode
AA- AC Control AC
DA- DC Control AC


Step 2: Choose a correct type
Current of Equipment/Ratio = Current of SSR
PS: The Ratio depend on the kind of your loading equipment.
Resistive load :70%, Inductive load:20%,Capacitive load:10%.

Step 3: Choose a suitable heat sink
During the useage of SSR, it will give out a lot of heat, so in order to extend the life of your SSR, please install a heat sink , also if the current is over 60A,the cooling fan also required.
PS: Our Heat Sink include 2 screws (for install heat sink) 

Notice: The inside of the solid-state relay is a semiconductor. A semiconductor switch is a non-physical contact switch. if use a multimeter diode or resistor to test ,it always show a high-impedance state, (multimeter light red).

According to the conventional detection methods of solid state relays: a load is required to test the switching state. Using an incandescent lamp as a dummy load is an obvious way to test continuity.

 

Ver todos los detalles