PZEM 5A 10A 100A Battery Capacity Tester AC80-260V 6in1 Voltage Current Power Capacity Meter Resistance Frequency Meter
PZEM 5A 10A 100A Battery Capacity Tester AC80-260V 6in1 Voltage Current Power Capacity Meter Resistance Frequency Meter
Prix habituel
$18.48 USD
Prix habituel
$0.00 USD
Prix promotionnel
$18.48 USD
Prix unitaire
par
Frais d'expédition calculés à l'étape de paiement.
Impossible de charger la disponibilité du service de retrait
The PZEM 6in1 Battery Capacity Tester accurately measures voltage, current, power capacity, resistance, and frequency for batteries within a range of 5A to 100A. With a wide voltage support of AC80-260V, it provides precise and reliable readings for battery capacity. Improve your battery performance with this professional and scientific tool.
SPECIFICATIONS
- Brand Name: EARUELETRIC
- Power Supply: AC
- Model Number: PZEM-018 PZEM-020 PZEM-022
- Display Type: LCD
- Accuracy Class: 1.0
- Dimensions: 90*50*25
- Rated Voltage: 220V
- Measuring Energy Range: 0~999kWh
- DIY Supplies: ELECTRICAL
Function
- Electrical parameter measurement function (voltage, current, active power, energy. frequency, power
- factor)
- Overload alarm function (over power alarm threshold, backlight and power flashing to alarm).
- Power alarm threshold preset function (can set power alarm threshold).
- The energy can be reset use the key.
- Store data when power off.
- Large-screen LCD
- Backlight function.
B. Appearance and Key function
L. Display Interface
Display interface is large-screen LCD, it can display six parameters at the same time.
Key
1.Backlight control
- Short press the key to turn on or off the backlight, the backlight has memory function, it can store the on oroff state when power off.
2. Reset energy
- Step1:Long press the key for 5 seconds until the energy value flash, then release the key.
- Step2: Short press the key again, then the energy value is cleared and exit the reset flashing state.
- Step3: If there is no operation on the key within 5 seconds, it means the energy value is not cleared and will exit the reset state.
3. Set power alarm threshold
- Step1: Long press the key until the LCD screen display "SET CLr", then release the key to enter the setting state
- Step2: Power window display the current power alarm value and the last digit begin to flash, then you can short press to plus 1, when there is no operating over 3 seconds, it will switch the digit position automatically, the setting method is as same as the above.
- Step3: After finish the setting, long press the key over 5 seconds will store automatically and exit
