This 100W monocrystalline flexible solar panel is built for curved surfaces and mobile installations. Choose single panels or multi-pack kits up to 1000W to charge any 12V or 24V battery bank on an RV, boat, electric vehicle, yacht or off-grid cabin.
Key benefits
- Bendable up to ~30° — conforms to RV roofs, boat decks, tents and irregular surfaces.
- Monocrystalline cells — higher efficiency per square meter than polycrystalline alternatives.
- Lightweight (~1.9 kg) — about 70% lighter than equivalent rigid glass panels.
- ETFE waterproof coating — resists UV, salt spray and abrasion.
- Scalable kits — 1, 2, 6, 8, or 10-panel bundles (100W to 1000W).
- Multi-warehouse shipping — choose China, Spain, Russia, Czech Republic or Belgium for faster delivery.
Technical specifications
| Rated power (per panel) | 100W |
|---|---|
| Cell type | Monocrystalline silicon |
| System voltage | 12V or 24V compatible |
| Open-circuit voltage (Voc) | ~22 V |
| Max bend angle | ~30° |
| Weight (per panel) | ~1.9 kg |
| Front surface | ETFE waterproof film |
| Connector | MC4 compatible |
| Available bundles | 100W ×1, ×2, ×6, ×8, ×10 — solar kits 200W and 100W |
What’s in the box
- Flexible monocrystalline solar panel(s) — quantity depends on the bundle selected
- Pre-installed junction box with MC4-compatible cables
- Installation guide
Charge controllers, batteries and inverters are sold separately to let you match the exact rating you need.
Best use cases
- RV, motorhome and camper van roofs
- Sailboats, yachts and marine cabins
- Off-grid cabins and tiny homes
- Electric vehicles and golf carts (auxiliary charging)
- Camping, expedition and emergency power kits
Compatibility
Works with any MPPT or PWM solar charge controller rated for 12V or 24V systems. Compatible with AGM, gel, flooded lead-acid and LiFePO₄ lithium battery banks.
Shipping, warranty and support
Pick the warehouse closest to your delivery address to reduce transit time. Each panel ships with a manufacturer warranty and our team is available by email for wiring and sizing questions.
Frequently Asked Questions
- What is the difference between a flexible and a rigid solar panel?
- Flexible monocrystalline panels can bend up to ~30°, weigh roughly 70% less than glass-framed rigid panels and stick directly to curved surfaces like RV roofs, boat decks and tent canopies. Rigid panels offer slightly higher long-term durability but require a frame and mounting brackets.
- Can I connect several panels together?
- Yes. Each 100W panel can be wired in series (to increase voltage for a 24V system) or in parallel (to keep 12V and add current). The kit bundles (200W, 600W, 800W, 1000W) are designed to be combined with a single MPPT charge controller.
- Is the panel really waterproof?
- The panel surface is IP67-rated against rain and splashes. Junction box connections should still be mounted facing downward and sealed when used in continuous marine spray environments.
- Which charge controller do I need?
- For 1 to 4 panels, a 20–40 A MPPT controller is typical. For 600 W+ systems, a 60 A MPPT is recommended. The controller must match your battery voltage (12V or 24V) and chemistry (AGM, gel, LiFePO₄).
- What does 'Ships From' mean?
- Ships From lets you choose the warehouse closest to you (China, Spain, Russia, Czech Republic or Belgium). Choosing a European warehouse usually reduces delivery time and avoids customs handling for EU customers.
- How long does the panel last?
- Monocrystalline cells typically retain over 80% of their rated output after 10+ years. The flexible ETFE coating used on this panel resists UV, salt and abrasion better than standard PET-coated panels.
