• Charge Controller 1000W MPPT Wind Turbine 24V/48V for and 600W Solar Panel - 54 Energy - Renewable Energy Store
  • Charge Controller 1000W MPPT Wind Turbine 24V/48V for and 600W Solar Panel - 54 Energy - Renewable Energy Store
  • Charge Controller 1000W MPPT Wind Turbine 24V/48V for and 600W Solar Panel - 54 Energy - Renewable Energy Store
  • Charge Controller 1000W MPPT Wind Turbine 24V/48V for and 600W Solar Panel - 54 Energy - Renewable Energy Store
  • Charge Controller 1000W MPPT Wind Turbine 24V/48V for and 600W Solar Panel - 54 Energy - Renewable Energy Store
1 5

1000W MPPT Wind & 600W Solar Hybrid Charge Controller 24V/48V with LED Display

1000W MPPT Wind & 600W Solar Hybrid Charge Controller 24V/48V with LED Display

$311.32 USD
$311.32 USD
Sale Sold out
Shipping calculated at checkout.
Color
Rated Voltage
Controller Type

Hybrid charge controller for a 1000W wind turbine and up to 600W of solar

One regulator, one battery bank, two energy sources. This wind-solar hybrid controller manages a turbine up to 1000W and a PV array up to 300W at 24V or 600W at 48V, with MPPT boost tracking on the wind input so the turbine keeps charging at rotor speeds where a simple PWM unit would still be idle.

Technical specifications

Model RX-600MPPT-MS
Battery voltage 24V / 48V
Rated wind input 1000W
Rated PV input 300W at 24V / 600W at 48V
Port current (wind) 20A DC at 24V, 15A DC at 48V (25A / 20A max)
Over-voltage protection 29.0V ±0.2V (24V) / 58.0V ±0.2V (48V)
Under-voltage protection 21.0V ±0.2V (24V) / 42.0V ±0.2V (48V)
Unloading PWM stepless high-frequency soft unloading (built-in)
Display 3-digit LED, two-button operation
Communication RS232 standard; RS485 or short-range RF optional
Operating range -40 to +80 °C, 20–85% RH non-condensing
Protection grade IP41
Controller size 158 × 113 × 60 mm (dump load 400 × 1101 × 155 mm)
Net weight 6.0 kg

What the display actually tells you

Wind input voltage, current, power, rotor speed, unloading current and cumulative generation; PV input voltage, current, power and generation; battery voltage, charge current, total charged capacity and state. That is enough data to diagnose a badly sited turbine without extra monitoring hardware.

Protection set

  • Overspeed and over-current protection on the turbine input, with induction lightning protection
  • Reverse-polarity protection on the PV input — the panels survive a wrong connection and work normally once corrected
  • Battery over-voltage and under-voltage cut-off with automatic recovery thresholds
  • Selectable output modes: light control, time control, dawn mode and reverse direction

Sizing guidance

Match the controller to peak turbine output, not nameplate power. A 1000W turbine can exceed 1000W in gusts, and headroom is what keeps the regulator alive. Keep the run between turbine and controller as short as practical: long thin cable costs you more energy than any tracking algorithm can recover.

Buying from 54 Energy

  • Sold by 54 Energy — one-year warranty
  • Delivery in 5 to 15 business days worldwide
  • Card and Apple Pay via Stripe, directly on this site
  • Transparent pricing; no quote required

Frequently asked questions

Can I run only solar, without a turbine connected?

Yes, the PV input works independently, but the unit is optimised as a hybrid regulator — for a solar-only system a dedicated PV MPPT is usually the better buy.

Is the dump load included?

Unloading is built into the controller; the external dump-load resistor bank dimensions are listed in the specification table.

Does it work at 12V?

No. This model supports 24V and 48V battery banks only.

Can I log data to a computer?

Yes, over the standard RS232 port; RS485 and short-range wireless are available as options.

Is it suitable for outdoor mounting?

It is IP41 with a three-protection conformal-coated board — install it sheltered from direct rain.

How long does delivery take?

Five to fifteen business days.

View full details