TOMZN Rapid Shutdown Device 4 String 1000V 40A Solar Panel Disconnect Switch Firefighter Safety Switch Remote Emergency Shut Off
TOMZN Rapid Shutdown Device 4 String 1000V 40A Solar Panel Disconnect Switch Firefighter Safety Switch Remote Emergency Shut Off
Couldn't load pickup availability
SPECIFICATIONS
Brand Name: TOMZN
Certification: CE
Does it include a Battery?: No
Does it include wireless functionality?: No
EU LVD Voltage: High voltage: Above 50Vac or 75Vdc
High-concerned chemical: None
Is Smart Device: no
Model Number: TORSD150-40-4/4
Mounting: Wall-mounted
Origin: Mainland China
Standard: IEC/EN60947-1&3, PV1
Type: Mini,Circuit breaker
Waterproofing grade: IP65
is_customized: Yes
TORSD150-40-4/4 DC Rapid Shutdown Device IP65 Enclosure
General
The TORSD150‑40‑4/4 is a motor‑driven DC rapid shutdown device (Firefighter Safety Switch) designed for photovoltaic and high‑voltage DC systems. It requires a continuous AC control supply to keep the internal DC switch in the ON state. In an emergency – when the AC power is cut off – the built‑in control board uses stored capacitor energy to drive the motor and automatically open the switch. Additionally, the switch trips automatically if the internal temperature exceeds 70°C. Housed in an IP65‑rated enclosure (shaft and mounting nut), it provides reliable protection against dust and water jets, making it suitable for outdoor and industrial installations. A red LED clearly indicates when the switch is ON.
Product parameters
Model: TORSD150‑40‑4/4
Type: DC Isolator (Firefighter Safety Switch)
Rated Voltage (VDC): 800 V / 1000 V / 1250 V / 1500 V (current derates accordingly)
Rated Current (A): 40 A / 40 A / 32 A / 26 A (matching voltage steps above)
Enclosure Protection: IP65 (shaft and mounting nut)
Control Power: AC supply (required to keep switch ON)
Automatic OFF Conditions: AC power off OR internal temperature > 70°C
Status Indication: Red LED when switch is ON
Operation Principle: Motor‑driven by internal control board with capacitor backup for OFF actuation
Special Note: Turn on AC power – the switch will start and remain ON, with the red LED illuminated.
Noted:Turn ON the AC power supply. The Firefighter Safety Switch will start to work and the DC switch will be ON, the status LED will be red.



























